Sylvan Heart Forum

General Category => Questions, Game Problems and Bugs => Topic started by: KukoShaku on July 11, 2006, 01:45:50 AM

Title: Sig - question
Post by: KukoShaku on July 11, 2006, 01:45:50 AM
Hiya, i know you`ve heard this one before... and i know i have... but i cannot remember the size dimentions for your sig. Can anyone help me out? or point me in the right direction. Thank you!   ;D
Title: Re: Sig - question
Post by: Bogoras on July 11, 2006, 03:50:16 AM
You can look at the sizes of Siggies already on these boards by right-clicking & hit "Properties"... Think there is one already on here that is 600x150 Pixels.. (The Avatars to the left are 65x65 pixels).

Hope this helps, but do not construe it as in any way, an Official" response.

~Bogoras~
Title: Re: Sig - question
Post by: Crimson on July 11, 2006, 03:51:44 AM
No special requirements have been set yet for the new forums that I know of. So maybe one of the board Admin's could set us some limits and post them in the appropriate location so everyone can find them easily.  :)
Title: Re: Sig - question
Post by: KukoShaku on July 11, 2006, 08:26:20 AM
Ah, thank you!  :)  I'm working on my sig and avatar at the moment, and i didn't want to be over the limits if there were any   :)  I'll post my sig here once it is ready!  hehehe
Title: Re: Sig - question
Post by: Valius on July 11, 2006, 09:18:48 AM
As a guide, I'd aim for a sig to be 500X150 at the most.

There's really no need to make one that's any bigger then that.
Title: Re: Sig - question
Post by: Bres on July 25, 2006, 08:27:27 PM
500x165 is mine, not too big I hope?
Title: Re: Sig - question
Post by: Admin Acacia on July 25, 2006, 08:38:26 PM
I looked back at old information, and we requested that you work to keep your sigs about 400 x 200.
After all, we wanna see what you have to say, not how large a pic. you can make.  :-)

Bres, your sig is actually 500x190.  You can tell the size of a sig by right clicking on it, and clicking properties.
Title: Re: Sig - question
Post by: Bres on July 25, 2006, 10:30:09 PM
well, is it okay?
Title: Re: Sig - question
Post by: Admin Acacia on July 26, 2006, 01:37:36 AM
It is a bit bigger that 400 x 200.
Title: Re: Sig - question
Post by: KukoShaku on July 31, 2006, 11:47:05 AM
I just made a sig, and if i did everything correct i should see it now... here goes!  :)
Title: Re: Sig - question
Post by: KukoShaku on July 31, 2006, 11:55:08 AM
Whacha think? ;D is that too big or can it stay this size?

Is there a way to move my sig, so it'll be in the centre? like crimson has got it sitting  :)
Title: Re: Sig - question
Post by: Admin Acacia on July 31, 2006, 12:30:28 PM
Signatures are to be around 400 x 200.  Your signature is 400 x 309, this is a bit larger than the required size.   As to centering it, you'll have to get that information from someone more in the know than myself.
Title: Re: Sig - question
Post by: KukoShaku on July 31, 2006, 12:38:10 PM
I'll tone the sig down a bit. I don't want to squash it, so i'll make the whole thing smaller  :)

Would you mind if i have it at 324 x 250? It doesn't seem to look good when the hight is 259 x 200  :-\ Here are both of them... i'll leave it like this untill tomorrow. Is it just me or does the smaller one look worse?
Title: Re: Sig - question
Post by: Admin Acacia on July 31, 2006, 01:20:37 PM
That smaller one works for me, and still looks nice.
Title: Re: Sig - question
Post by: KukoShaku on July 31, 2006, 01:24:15 PM
Rightyo, the size is over and done with  :) now to find out how to get the thing to the centre  :P hehehehe

Does anyone know how to do this? posting it here or sending me a PM is fine with me   :)
Title: Re: Sig - question
Post by: Crimson on July 31, 2006, 04:34:44 PM
I can answer your centering quetion. Its all very simple, but I will use <> instead of [] so it shows up and you can see the code instead of the code making my text centered, so make sure you use the correct brackets when doing your sig. Simply place <center> at the beginning of your sig code and at the very end end it with </center>. Not very hard now is it.  :) Good luck!
Title: Re: Sig - question
Post by: KukoShaku on August 01, 2006, 08:15:51 AM
 ;D ;D ;D Yay!!  it works!  thank you!! ;D ;D ;D
Title: Re: Sig - question
Post by: Kevetsa on August 01, 2006, 10:58:52 AM
Bah, I just put a bunch of spaces before the image tag.
Title: Re: Sig - question
Post by: Admin Acacia on August 01, 2006, 12:44:49 PM
Did you know, Kevetsa, that your sig is 600 x150?
Title: Re: Sig - question
Post by: Kevetsa on August 01, 2006, 07:47:17 PM
Hm, no, I didn't. Oak made it for me back on SD so I didn't really think about the specifics. I'll take it down now and play with it when I get home.
Title: Re: Sig - question
Post by: Loco Moco on August 01, 2006, 09:23:32 PM
Hrmm i need a sig... anyone want to make me one?
Title: Re: Sig - question
Post by: Kevetsa on August 02, 2006, 12:52:21 AM
Heh, I remember asking that. Got no replies until I made my own, then upon seeing it Oak made me a better one. Such is life.
Title: Re: Sig - question
Post by: KukoShaku on August 02, 2006, 03:18:02 AM
What kind of sig did you have in mind? My sig is the first i made... I could give it a shot if you like :) I have nothing to do (for a while anyway). This would be some good parctice for me  :P  hehehehe  Just give me a yell at some point :)
Title: Re: Sig - question
Post by: Loco Moco on August 03, 2006, 03:41:48 AM
Well hehe a neon blue background hehe if you know what i mean... then like a dwarf with a crown since i am the king *smirks* then it is sorta like saluting. Sorta like placing his hand over his heart. I guess i cant wield a shield... so just get an axe in his hand hehe... if you do it ill get ya.... 1k val and 100k
Title: Re: Sig - question
Post by: KukoShaku on August 03, 2006, 12:32:38 PM
Hmmm... *runs off looking for pictures* If you have any pictures you want me to use, you can throw em my way  :) hehehehe  But i'll see what i can do :)
Title: Re: Sig - question
Post by: Loco Moco on August 03, 2006, 01:08:34 PM
sorry i dont have any pics
Title: Re: Sig - question
Post by: KukoShaku on August 03, 2006, 01:12:16 PM
*runs back*

ok, i'll keep looking...  :)

*runs off again*
Title: Re: Sig - question
Post by: Loco Moco on August 03, 2006, 01:35:16 PM
hehe ok
Title: Re: Sig - question
Post by: Admin Acacia on June 06, 2007, 01:56:23 AM
Here is a bump to this very old topic, but we have some new players coming in and some new avatar sig pictures showing up.  Please keep your sig picture at 400 X 200.  You can check a sig size by right clicking and clicking on properties.
Title: Re: Sig - question
Post by: Kydaer Shol on June 07, 2007, 12:42:06 AM
*sniffs* I miss my siggy.......